Department has state of art laboratories, the one of its kind in the country. The Laboratories are equipped with instruments viz., Long Core Apparatus, PVT Apparatus, Gas Chromatograph, Triaxial Core Holder, Capillary Pressure Apparatus, Cement Consistometer, Displacement Pump, Core Cutting Drill Press, Brookfield Viscometer, Rheometer, Tensiometer E P & Lubricity Tester, HP HT Filter Press, UV-Visible Spectrophotometer, Plate Distillation Column, Ruska Porosimeter, Ruska Air Permeameter, Ruska Liquid Permeameter, Hessler Core Holder, High Pressure Syringe Pump etc..
|
Reservoir Engineering Laboratory :
|
This laboratory is equipped with a number of instrument/equipment to measure permeability, porosity, formation resistivity, and relative perฌmeability, etc. Hands on experiences with simple and sophisticated equipment are provided.
|
Drilling Fluid and Cementing Laboratory
:
|
This teaching lab provides students hands-on experience in dealing with changing behaviors of drilling fluids. The analysis includes:
Standard methods for testing drilling fluids
Colloidal properties of clays
Filtration properties, effects of treating agents
Effects of contaminants and chemical treatments
Solids analysis, HTHP testing, lubricity
Viscous characteristics and control of properties
Low water loss, salt water drilling fluids, and alkalinity determination
|
Product Testing Laboratory
:
|
State-of-the-Art product testing laboratory is having all the modern equipments to measure Specific Gravity/Density, Kinematic Viscosity, Viscosity Index, Ash Content ( by Wt ), Carbon Residue, Sulphur Content, Flash Point, Water Content, Pour Point, Oxidation Test, Foaming Characterstic, Acidity, Reid Vapour Pressure, Evaporation Loss, Asphaltene Content, Trace Metal ( V,Ni,Cu etc in ppm ), Gross Calorific Value (in K. cal/Kg) etc.
|
Enhanced Oil Recovery Laboratory
:
|
The laboratory is equipped with:
Reservoir condition waterflood and chemical flood apparatus
PVT Apparatus
Gas chromatograph
Long Core Apparatus
High temperature/high pressure analysis
Ruska positive displacement pump
|
Gas Hydrates Laboratory
:
|
Sophisticated equipment in this lab is devoted to understanding the growth and dissolution of gas hydrate crystals.
|
Process Engineering Laboratory
:
|
Modern equipment enables students to evaluate heat transfer coefficient, mass transfer coefficient, on-off control, boundary layer thickness, viscosity measurement and frictional loss, flame propagation, filmwise and dropwise condensation, etc.
|
Instrumental Analysis & Measurement Laboratory
:
|
In this laboratory the properties of different pure and synthesized fluids are measured by a number of sophisticated instruments like, Rheometer, viscometer, tensiometer, optical microscope etc.
|
Computer and Simulation Lab
:
|
IThe Dept. is also having two computational laboratories with sufficient numbers of computers. The Laboratories are rich with more than 20 petroleum engineering software as follows:
IHS Softwares (20 Network License)
PERFORM - NODAL analysis, well/flowline optimization
SubPUMP - Industry's leading unbiased, vendor-neutral electric submersible pump design and analysis
Pipesoft-2: Surface network simulator with three solution methods and powerful output visualization
OilWatฎ/GasWatฎ : Comprehensive material balance analysis (conventional and generalized)
GasLIFT: Easy-to-use design for gas lift
VolOil/VolGas : Volumetrics, Monte Carlo and estimated recoveries
PVTLIB : Black oil/compositional properties, over 140 correlations
RAPTOR : Fast well test analysis
EPS Software (single Network license) donated by Weatherford Oil Tool Middle East Ltd.
Wellflo : well modeling software. Wellflow is an easy-to-use Windows based simulator that calculates pressures, temperatures, flowrates, liquid holdup and velocities in a wellbore. The software is specially designed to help as a diagnostic tool for uncontrolled well situations or to be used in contingency planning for new well.
MatBal: reservoir analysis and production forecasting
PanSys: well test analysis
|
PETROLEUM EXPERT SOFTWARE: (10 network license)
:
|
PROSPER: Well Modelling and Design-Version 10
MBAL: Reservoir Analytical Simulation Version 9
PVTP : Fluid Characterisation Version 8
GAP : Multiphase Network Optimisation Version 7
REVEAL : Specialised Reservoir Simulator & Near Wellbore Reservoir Simulator
RESOLVE: Integrated Production Controller Version 3
KAPPA ENGINEERING SOFTWARES (network license):
Ecrin v4.0 includes the following softwares:
Diamant: data management
Saphir (NL): Pressure Transient Analysis
Topaze (NL): Production Analysis
Rubis: Reservoir simulator
Emeraude: Production logging module
|
|
|
